PGDCA, BCA, B-Tech, MCA, M-Tech, B.Sc computer science राजस्थान सूचना सहायक व कंप्यूटर शिक्षक विशेष नोट्स: इस अध्याय में हम Intrusion Prevention Systems (IPS): In-line Active Defense (IPS (इंट्रूज़न प्रिवेंशन सिस्टम): इन-लाइन एक्टिव डिफेंस और पैकेट ब्लॉकिंग) की संपूर्ण थ्योरी, मुख्य तकनीकी बिंदु, तुलनात्मक तालिका और विगत परीक्षाओं के पैटर्न पर आधारित 20 अति-महत्वपूर्ण बहुविकल्पीय प्रश्न (MCQs) विस्तृत हिंदी व अंग्रेजी व्याख्या सहित पढ़ेंगे।
Overview: An Intrusion Prevention System (IPS) is an active security control positioned directly in-line along the network data path to detect and immediately drop malicious traffic before it reaches vulnerable targets. Operating across Layers 2 through 7, an IPS combines exploit signatures, protocol anomaly detection, and virtual patching while introducing latency and Fail-Open versus Fail-Closed availability trade-offs.
अध्याय सार: इंट्रूज़न प्रिवेंशन सिस्टम (IPS) एक सक्रिय सुरक्षा तंत्र है जो नेटवर्क के मुख्य मार्ग (In-Line) पर बैठकर खतरनाक पैकेट्स को लक्ष्य तक पहुँचने से पहले ही तुरंत ब्लॉक कर देता है। यह लेयर 2 से 7 तक एक्सप्लॉइट सिग्नेचर, प्रोटोकॉल विश्लेषण और वर्चुअल पैचिंग करता है तथा इसमें Fail-Open बनाम Fail-Closed हार्डवेयर नीति महत्वपूर्ण होती है।
Intrusion Prevention Systems (IPS): In-line Active Defense: Detailed Notes & Architecture (IPS (इंट्रूज़न प्रिवेंशन सिस्टम): इन-लाइन एक्टिव डिफेंस और पैकेट ब्लॉकिंग)
1. In-Line Deployment Architecture vs Out-of-Band IDS (इन-लाइन डिप्लॉयमेंट संरचना बनाम आउट-ऑफ-बैंड IDS)
[EN] While a passive IDS sits out-of-band on a mirrored SPAN/TAP link and can only alert after packets pass, an IPS sits physically in-line (typically as a Layer 2 transparent bump-in-the-wire bridge between the perimeter firewall and core switch). Every inbound and outbound packet must traverse the IPS inspection buffer before forwarding. Host-based IPS (HIPS) extends inline prevention directly onto endpoints by hooking OS kernel system calls and blocking unauthorized memory injections or privilege escalations.
[HI] जहाँ पैसिव IDS मुख्य नेटवर्क से बाहर रहकर केवल अलर्ट भेजता है, वहीं IPS सीधे मुख्य केबल मार्ग (In-Line) पर एक पारदर्शी लेयर 2 ब्रिज के रूप में लगा होता है। प्रत्येक आने-जाने वाला पैकेट लक्ष्य पर जाने से पहले IPS इंजन से होकर गुजरता है। Host-based IPS (HIPS) सीधे एंडपॉइंट कंप्यूटर के ऑपरेटिंग सिस्टम कर्नेल और सिस्टम कॉल्स को रोककर संदिग्ध प्रक्रियाओं या मेमोरी हमलों को चलने से पहले ही बंद कर देता है।
2. Active Blocking Actions & Virtual Patching (सक्रिय ब्लॉकिंग कार्रवाइयाँ और वर्चुअल पैचिंग)
[EN] When traffic matches an exploit signature, buffer-overflow pattern, or protocol violation, an inline IPS takes immediate preventive action: silently dropping the packet (`drop`), injecting TCP RST packets to tear down both session ends (`reject`), temporarily shunning/quarantining the attacker IP, or normalizing fragmented streams. Crucially, IPS provides 'Virtual Patching'—shielding unpatched production servers from newly disclosed vulnerabilities (such as Log4Shell or SMB EternalBlue) at the network wire until scheduled OS maintenance windows occur.
[HI] किसी एक्सप्लॉइट या बफर-ओवरफ्लो सिग्नेचर से मेल खाने पर IPS तुरंत कार्रवाई करता है: पैकेट को चुपचाप गिराना (`drop`), TCP RST भेजकर कनेक्शन तोड़ना (`reject`), या हमलावर IP को अस्थायी ब्लॉक करना। IPS की एक बड़ी विशेषता 'वर्चुअल पैचिंग' है—अर्थात जब तक किसी सर्वर पर नया आधिकारिक सिक्योरिटी पैच इंस्टॉल न हो पाए, तब तक IPS नेटवर्क स्तर पर ही उस CVE हमले को रोककर सर्वर को सुरक्षित रखता है।
3. Fail-Open vs Fail-Closed Hardware Bypass & Latency (Fail-Open बनाम Fail-Closed हार्डवेयर बायपास और विलंबता)
[EN] Because all live traffic flows through the IPS, any hardware crash, power loss, or software hang turns the IPS into a single point of failure. Enterprise IPS interfaces include optical/copper bypass relays offering two failover modes: Fail-Open automatically bridges traffic straight across without inspection during an outage (prioritizing Availability, common on hospital/campus links), while Fail-Closed cuts the network link completely on failure (prioritizing Security, common on banking/classified segments). Inline DPI buffering also adds minor latency and jitter.
[HI] इन-लाइन होने के कारण IPS के खराब होने पर पूरा नेटवर्क ठप हो सकता है। इससे निपटने के लिए हार्डवेयर बायपास दो मोड देते हैं: Fail-Open मोड में IPS बंद होने पर बिना जाँच किए ट्रैफिक को सीधा आगे जाने दिया जाता है (उपलब्धता को प्राथमिकता), जबकि Fail-Closed मोड में खराबी आने पर पूरा नेटवर्क कनेक्शन तुरंत काट दिया जाता है (सुरक्षा को सर्वोच्च प्राथमिकता)। इन-लाइन निरीक्षण से नेटवर्क में थोड़ी विलंबता (Latency) भी जुड़ती है।
4. False Positive Blast Radius & Staged Tuning Workflow (फॉल्स पॉजिटिव का जोखिम और चरणबद्ध ट्यूनिंग प्रक्रिया)
[EN] In a passive IDS, a False Positive only creates an annoying alert in a log dashboard. In an active inline IPS, however, a False Positive actively blocks legitimate customer checkout requests, ERP databases, or VoIP calls—causing immediate business downtime. Therefore, security engineers always deploy a new IPS first in passive Detection/Audit ('IDS/Tap') mode for 2-4 weeks to baseline traffic and suppress noisy rules before flipping high-confidence signatures into active inline blocking (`drop`) mode.
[HI] IDS में गलत अलर्ट (False Positive) केवल लॉग की भीड़ बढ़ाता है, लेकिन IPS में एक False Positive वैध ग्राहकों के भुगतान या जरूरी व्यावसायिक सेवाओं को सीधे ब्लॉक कर सकता है। इसलिए इंजीनियर किसी नए IPS को पहले कुछ सप्ताह पैसिव डिटेक्शन/ऑडिट मोड में चलाकर गलत नियमों को ठीक (Tune) करते हैं और पूर्ण विश्वास होने के बाद ही सक्रिय ब्लॉकिंग मोड लागू करते हैं।
Syntax, Formula & Technical Example (Intrusion Prevention Systems (IPS): In-line Active Defense)
# Suricata Inline IPS Mode Rule (NFQUEUE / AF_PACKET Bridge)
drop tcp $EXTERNAL_NET any -> $HOME_NET 445 (
msg:"ET EXPLOIT EternalBlue SMBv1 Remote Code Execution Attempt";
flow:established,to_server;
content:"|ff|SMB|"; offset:4; depth:5;
classtype:attempted-admin; sid:2024218; rev:4;
)
# Fail-Open: IPS Failure -> Bypass relay closes -> Traffic flows uninspected
# Fail-Closed: IPS Failure -> Interface drops link -> All traffic blocked
Intrusion Prevention Systems (IPS): In-line Active Defense Quick Reference & Comparison Table
| IPS Operational Feature | In-Line Technical Behavior | Deployment Impact & Exam Note |
|---|---|---|
| In-Line Bump-in-the-Wire | All packets transit IPS interfaces physically before delivery | Enables proactive blocking; introduces single point of failure |
| Fail-Open Bypass Policy | Hardware relay passes uninspected traffic if IPS crashes | Maximizes network Availability over strict security |
| Fail-Closed Policy | Drops all network traffic completely during IPS outage | Maximizes Security at cost of complete downtime |
| Virtual Patching | Blocks CVE exploit payloads at wire before server receives them | Buys critical time before rebooting production servers |
Intrusion Prevention Systems (IPS): In-line Active Defense Top 20 Bilingual MCQs with Answers
Q1. Where MUST a Network Intrusion Prevention System (NIPS) be physically positioned in the network topology to block attacks before delivery?
(हमलों को लक्ष्य तक पहुँचने से पहले रोकने के लिए Network IPS (NIPS) को नेटवर्क टोपोलॉजी में कहाँ लगाया जाना चाहिए?)
(A) Disconnected on an offline forensic laptop
(B) Out-of-band on a read-only switch SPAN mirror port
(C) Behind an unused printer port
(D) Directly in-line along the active network path so every packet passes through it
Correct Answer: (D)
[EN] Unlike passive IDS on SPAN/TAP copies, an IPS must sit in-line as a transparent bridge or router hop to drop malicious packets before they reach the destination.
[HI] पैकेट को लक्ष्य तक जाने से पहले ही गिराने के लिए IPS का मुख्य नेटवर्क पथ में सीधे (In-Line) स्थित होना अनिवार्य है।
Q2. What fundamental operational difference separates an IPS from a traditional IDS?
(एक IPS को पारंपरिक IDS से अलग करने वाला सबसे बुनियादी अंतर क्या है?)
(A) An IPS operates only on Layer 1 hubs; an IDS operates on Layer 7
(B) An IPS requires zero signatures or rules
(C) An IDS blocks packets faster than an IPS
(D) An IPS actively drops or blocks malicious traffic inline, whereas an IDS passively monitors and raises alerts
Correct Answer: (D)
[EN] IDS is a passive detective sensor; IPS is an active preventive control capable of terminating attacks in real time.
[HI] IDS केवल पैसिव निगरानी कर अलर्ट देता है, जबकि IPS इन-लाइन रहकर दुर्भावनापूर्ण पैकेट्स को वास्तविक समय में रोकता है।
Q3. Why can an inline IPS introduce a 'Single Point of Failure' (SPOF) risk that passive IDS never causes?
(इन-लाइन IPS नेटवर्क में 'Single Point of Failure' (SPOF) का जोखिम क्यों पैदा करता है जबकि पैसिव IDS नहीं?)
(A) If the inline IPS loses power or software hangs without failover, production connectivity drops completely
(B) Passive IDS cuts Ethernet cables automatically
(C) IPS turns off BGP across the entire Internet
(D) IPS forces all users onto dial-up modems
Correct Answer: (A)
[EN] Because all production traffic physically transits the IPS NICs, an appliance crash disrupts live operations unless HA pairs or Fail-Open bypass hardware exist.
[HI] पूरा लाइव ट्रैफिक IPS के अंदर से होकर गुजरता है, इसलिए बिना HA या बायपास के IPS बंद होते ही पूरा नेटवर्क रुक सकता है।
Q4. In an IPS hardware bypass setup, what happens when a unit configured as `Fail-Open` suffers a complete power outage?
(यदि किसी IPS में हार्डवेयर बायपास `Fail-Open` पर सेट हो और अचानक बिजली चली जाए या सिस्टम क्रैश हो जाए, तो क्या होगा?)
(A) The IPS turns into a Fail-Closed firewall
(B) The bypass relay closes electrically/optically, letting traffic flow straight across without inspection
(C) Every packet is copied to an attacker IP
(D) All internal and external network traffic halts permanently
Correct Answer: (B)
[EN] Fail-Open preserves business availability by keeping the link up uninspected during failure, making it ideal for hospitals or ISPs.
[HI] Fail-Open मोड में सिस्टम फेल होने पर बायपास रिले जुड़ जाता है और बिना जाँच के ट्रैफिक लगातार चलता रहता है ताकि सेवा बंद न हो।
Q5. When is `Fail-Closed` mode the preferred IPS failure policy over `Fail-Open`?
(`Fail-Open` की तुलना में किस स्थिति में IPS की `Fail-Closed` नीति को प्राथमिकता दी जाती है?)
(A) In high-security environments (defense, core banking vaults) where uninspected traffic is unacceptable even briefly
(B) Inside university dormitories
(C) When streaming high-volume public video broadcasts
(D) On public guest Wi-Fi networks prioritizing uptime
Correct Answer: (A)
[EN] Fail-Closed enforces strict security: if inspection ceases, no packet passes, sacrificing availability to prevent uninspected breaches.
[HI] बैंकिंग वॉल्ट या रक्षा नेटवर्क जैसे अति-संवेदनशील स्थानों पर सुरक्षा सर्वोपरि होती है, इसलिए IPS फेल होने पर पूरा ट्रैफिक रोक देना बेहतर माना जाता है।
Q6. What does 'Virtual Patching' via an IPS accomplish for an enterprise?
(IPS के माध्यम से 'वर्चुअल पैचिंग' (Virtual Patching) किसी संगठन के लिए क्या कार्य करती है?)
(A) Upgrades Windows Server kernels over ICMP
(B) Deploys an inline IPS exploit rule to block attacks targeting an unpatched CVE until maintenance windows allow OS patching
(C) Automatically rewrites and recompiles proprietary C++ source code
(D) Eliminates the need to ever apply vendor security patches
Correct Answer: (B)
[EN] Virtual patching provides immediate emergency mitigation for mission-critical or legacy systems that cannot reboot mid-day, though real vendor patching should follow.
[HI] वर्चुअल पैचिंग किसी अनपैच्ड सर्वर की नई कमजोरी (CVE) पर होने वाले हमले को नेटवर्क स्तर पर ही रोक देती है जब तक कि सर्वर रीबूट कर असली पैच न लग सके।
Q7. Why are False Positives dramatically more dangerous on an inline IPS than on a passive IDS?
(पैसिव IDS की तुलना में इन-लाइन IPS पर False Positive (गलत अलर्ट) कहीं अधिक खतरनाक क्यों होते हैं?)
(A) IPS cannot generate False Positives
(B) IPS False Positives never appear in logs
(C) A False Positive in an IDS deletes database rows
(D) A False Positive in an IPS actively drops legitimate business traffic, causing service outages
Correct Answer: (D)
[EN] Mistaking a genuine API checkout call for SQL injection causes an IPS to drop the customer's transaction outright.
[HI] IPS में False Positive का अर्थ है कि वैध ग्राहक या व्यावसायिक ट्रैफिक असली मानकर ब्लॉक कर दिया जाएगा, जिससे सेवा बाधित हो सकती है।
Q8. What is the recommended deployment sequence when introducing a brand-new IPS into a live production enterprise network?
(किसी लाइव उत्पादन नेटवर्क में बिल्कुल नया IPS लगाने के लिए अनुशंसित चरणबद्ध प्रक्रिया क्या है?)
(A) Disable all firewall rules permanently first
(B) Connect the IPS only to the guest printer VLAN
(C) Run in passive Detection/Monitor mode first to tune out False Positives before enabling inline Drop/Block mode
(D) Turn on strict drop mode for all experimental rules on day one
Correct Answer: (C)
[EN] Running in passive audit mode reveals which rules falsely trigger on normal internal software so engineers can tune exceptions safely.
[HI] नए IPS को पहले कुछ दिन पैसिव मॉनिटर (Detection) मोड में चलाकर गलत नियमों को सुधारा जाता है, और फिर सक्रिय ब्लॉकिंग चालू की जाती है।
Q9. Which active response mechanism allows an IPS to abruptly tear down a malicious ongoing TCP session without waiting for endpoints?
(कौन सी सक्रिय प्रतिक्रिया विधि IPS को किसी चल रहे दुर्भावनापूर्ण TCP सेशन को तुरंत तोड़ने में सक्षम बनाती है?)
(A) Lowering the Ethernet cable voltage
(B) Sending an ICMP Echo Reply
(C) Injecting forged TCP Reset (`RST`) packets toward both client and server
(D) Changing the DNS MX record
Correct Answer: (C)
[EN] Spoofing TCP RST segments with matching sequence numbers closes sockets on both sides immediately.
[HI] IPS दोनों सिरों पर मेल खाने वाले सीक्वेंस नंबर के साथ नकली TCP Reset (`RST`) पैकेट भेजकर संदिग्ध कनेक्शन को तुरंत समाप्त कर देता है।
Q10. In Suricata / Snort inline IPS rule syntax, which rule action keyword replaces `alert` to actively discard matching packets?
(Suricata / Snort इन-लाइन IPS नियम में मैच होने वाले पैकेट को सक्रिय रूप से गिराने के लिए `alert` के स्थान पर कौन सा कीवर्ड प्रयुक्त होता है?)
(A) `span`
(B) `echo`
(C) `monitor`
(D) `drop` (or `reject` to also send TCP RST/ICMP error)
Correct Answer: (D)
[EN] In inline IPS mode, `drop` silently discards the packet and logs the event, whereas `alert` lets the packet pass.
[HI] इन-लाइन IPS मोड में `drop` कीवर्ड पैकेट को आगे बढ़ने से रोककर नष्ट कर देता है (और `reject` साथ में RST भी भेजता है)।
Q11. How does a Host-based IPS (HIPS) stop a zero-day ransomware process that already bypassed perimeter network defenses?
(यदि कोई ज़ीरो-डे रैनसमवेयर परिधि नेटवर्क सुरक्षा पार कर भी जाए, तो Host-based IPS (HIPS) उसे कंप्यूटर पर कैसे रोकता है?)
(A) By hooking OS kernel syscalls and behaviorally blocking mass file encryption or unauthorized memory injection
(B) By checking BGP AS numbers on routers
(C) By inspecting Ethernet frames inside the ISP submarine cable
(D) By turning off the building air conditioning
Correct Answer: (A)
[EN] HIPS monitors behavioral system calls locally and kills processes attempting suspicious DLL injection, shadow-copy deletion, or rapid file tampering.
[HI] HIPS सिस्टम के कर्नेल स्तर पर व्यवहार की निगरानी करता है और तेज़ी से फाइलों को एन्क्रिप्ट करने या शैडो कॉपी मिटाने वाली प्रक्रिया को तुरंत रोक देता है।
Q12. How does an IPS differ from a standard stateless or stateful Layer 3/4 firewall?
(एक IPS सामान्य लेयर 3/4 स्टेटलेस या स्टेटफुल फायरवॉल से किस प्रकार भिन्न होता है?)
(A) A standard firewall inspects every SQL query string by default
(B) A standard firewall checks IP/port/state rules, whereas an IPS inspects packet payloads up to Layer 7 for vulnerability exploits and anomalies
(C) An IPS cannot run inline
(D) A firewall cannot block IP addresses
Correct Answer: (B)
[EN] Even when port 443 or 80 is permitted by the firewall, the IPS catches application-layer CVE exploits inside the stream.
[HI] सामान्य फायरवॉल केवल पोर्ट व सेशन अनुमति देखता है, जबकि IPS अनुमत पोर्ट के अंदर चल रहे पेलोड में CVE एक्सप्लॉइट व प्रोटोकॉल गड़बड़ी पकड़ता है।
Q13. Why must an inline IPS normalize fragmented IP packets and reassemble TCP streams before checking exploit signatures?
(एक्सप्लॉइट सिग्नेचर जांचने से पहले इन-लाइन IPS के लिए IP फ्रैगमेंट जोड़ना और TCP स्ट्रीम को पुनः व्यवस्थित करना क्यों आवश्यक है?)
(A) To convert TCP packets into UDP streams
(B) To stop attackers from hiding exploit strings across fragment boundaries or overlapping TCP segments
(C) To disable TLS certificates automatically
(D) Because Ethernet switches only forward fragmented packets
Correct Answer: (B)
[EN] Without full stream normalization, an attacker can split `/bin/sh` across tiny fragments so each fragment looks harmless individually.
[HI] यदि हमलावर `/bin/sh` जैसे कमांड को छोटे-छोटे पैकेट टुकड़ों में बांट दे, तो बिना रीअसेंबली किए IPS उन्हें अलग-अलग टुकड़ों में पहचान नहीं पाएगा।
Q14. Which metric captures the small delay added to packet transit times because an inline IPS must buffer and scan payloads before forwarding?
(इन-लाइन IPS द्वारा पैकेट को बफर कर स्कैन करने के कारण ट्रांसमिशन समय में होने वाली देरी को किस शब्द से मापा जाता है?)
(A) BGP Convergence
(B) Added Latency (and Jitter)
(C) MTU Expansion
(D) ARP Poisoning
Correct Answer: (B)
[EN] Because the IPS inspects packets before forwarding them out the egress port, high-throughput environments rely on hardware ASICs to keep latency in microseconds.
[HI] चूंकि IPS पैकेट आगे भेजने से पहले उसे रोककर पढ़ता है, इसलिए नेटवर्क में सूक्ष्म विलंबता (Latency) जुड़ती है जिसे हार्डवेयर ASIC से कम रखा जाता है।
Q15. Which combination of detection engines gives a modern inline IPS the strongest coverage against both known CVEs and malformed packet evasions?
(ज्ञात CVEs और विकृत पैकेट हमलों दोनों से बचने के लिए एक आधुनिक इन-लाइन IPS में किन डिटेक्शन इंजनों का संयोजन होता है?)
(A) Signature-based exploit matching + Statistical Anomaly detection + Stateful Protocol Analysis
(B) Plaintext Telnet logging only
(C) MAC filtering + Hub broadcasting
(D) MD5 password cracking + Ping sweep
Correct Answer: (A)
[EN] Combining exact CVE signatures with protocol RFC compliance and behavioral anomalies blocks both documented exploits and unusual protocol abuse.
[HI] सिग्नेचर मैचिंग, अनोमली डिटेक्शन और स्टेटफुल प्रोटोकॉल विश्लेषण का संयोजन ज्ञात व अज्ञात दोनों तरह के नेटवर्क हमलों को रोकता है।
Q16. Which of the following statements about Intrusion Prevention Systems (IPS) is FALSE?
(इंट्रूज़न प्रिवेंशन सिस्टम (IPS) के बारे में निम्नलिखित में से कौन सा कथन असत्य (FALSE) है?)
(A) Fail-Open bypass allows uninspected traffic through if the IPS crashes
(B) An IPS can silently drop malicious packets or reset TCP connections inline
(C) An IPS operates out-of-band on a passive switch SPAN port so it can never delay or drop live traffic
(D) False positives in blocking mode can disrupt legitimate production applications
Correct Answer: (C)
[EN] Out-of-band deployment on a passive SPAN port describes a passive IDS, whereas an IPS must operate in-line to actively block packets.
[HI] पैसिव SPAN पोर्ट पर आउट-ऑफ-बैंड काम करना IDS की विशेषता है; IPS को पैकेट रोकने के लिए इन-लाइन होना आवश्यक है।
Q17. Within Intrusion Prevention Systems (IPS): In-line Active Defense, which ips operational feature directly maps to: "All packets transit IPS interfaces physically before delivery"?
(Intrusion Prevention Systems (IPS): In-line Active Defense में कौन सा IPS Operational Feature सीधे "All packets transit IPS interfaces physically before delivery" से संबंधित है?)
(A) Fail-Open Bypass Policy
(B) Virtual Patching
(C) In-Line Bump-in-the-Wire
(D) Fail-Closed Policy
Correct Answer: (C)
[EN] In Intrusion Prevention Systems (IPS): In-line Active Defense, 'In-Line Bump-in-the-Wire' handles 'All packets transit IPS interfaces physically before delivery' (Enables proactive blocking; introduces single point of failure).
[HI] Intrusion Prevention Systems (IPS): In-line Active Defense में 'In-Line Bump-in-the-Wire' का कार्य/विवरण 'All packets transit IPS interfaces physically before delivery' (Enables proactive blocking; introduces single point of failure) है।
Q18. Which option accurately describes 'Fail-Open Bypass Policy' in Intrusion Prevention Systems (IPS): In-line Active Defense?
(Intrusion Prevention Systems (IPS): In-line Active Defense के संदर्भ में 'Fail-Open Bypass Policy' की सही विशेषता कौन सी है?)
(A) Hardware relay passes uninspected traffic if IPS crashes
(B) All packets transit IPS interfaces physically before delivery
(C) Blocks CVE exploit payloads at wire before server receives them
(D) Drops all network traffic completely during IPS outage
Correct Answer: (A)
[EN] 'Fail-Open Bypass Policy' provides 'Hardware relay passes uninspected traffic if IPS crashes' — key point: Maximizes network Availability over strict security.
[HI] 'Fail-Open Bypass Policy' का मुख्य विवरण 'Hardware relay passes uninspected traffic if IPS crashes' है (Maximizes network Availability over strict security)।
Q19. In Intrusion Prevention Systems (IPS): In-line Active Defense, identify the correct parameter for the specification: "Drops all network traffic completely during IPS outage".
(Intrusion Prevention Systems (IPS): In-line Active Defense में "Drops all network traffic completely during IPS outage" विवरण किस विकल्प के लिए सही है?)
(A) Fail-Open Bypass Policy
(B) In-Line Bump-in-the-Wire
(C) Fail-Closed Policy
(D) Virtual Patching
Correct Answer: (C)
[EN] 'Fail-Closed Policy' corresponds to 'Drops all network traffic completely during IPS outage' (Maximizes Security at cost of complete downtime).
[HI] 'Fail-Closed Policy' का संबंध 'Drops all network traffic completely during IPS outage' (Maximizes Security at cost of complete downtime) से है।
Q20. Considering Intrusion Prevention Systems (IPS): In-line Active Defense, what key behavior defines 'Virtual Patching'?
(Intrusion Prevention Systems (IPS): In-line Active Defense में 'Virtual Patching' की मुख्य भूमिका या मान क्या है?)
(A) Blocks CVE exploit payloads at wire before server receives them
(B) Hardware relay passes uninspected traffic if IPS crashes
(C) Drops all network traffic completely during IPS outage
(D) All packets transit IPS interfaces physically before delivery
Correct Answer: (A)
[EN] 'Virtual Patching' represents 'Blocks CVE exploit payloads at wire before server receives them' (Buys critical time before rebooting production servers).
[HI] 'Virtual Patching' का अर्थ/मान 'Blocks CVE exploit payloads at wire before server receives them' है (Buys critical time before rebooting production servers)।
Intrusion Prevention Systems (IPS): In-line Active Defense — Exam FAQs
Q1: Can one appliance work as both an IDS and an IPS?
क्या एक ही उपकरण IDS और IPS दोनों के रूप में काम कर सकता है?
[EN] Yes. Tools like Snort, Suricata, and enterprise NGFW IPS blades support both modes: placed on a passive mirror port with `alert` rules they act as an IDS, and placed inline with `drop` rules they function as an IPS.
[HI] हाँ। Snort, Suricata और आधुनिक NGFW दोनों मोड में चल सकते हैं—मिरर पोर्ट पर `alert` के साथ IDS की तरह और इन-लाइन `drop` नियम के साथ IPS की तरह।
Q2: Does enabling an IPS eliminate the need for a firewall or antivirus?
क्या IPS लगाने के बाद फायरवॉल या एंटीवायरस की जरूरत खत्म हो जाती है?
[EN] No. Security relies on Defense-in-Depth: firewalls enforce coarse perimeter/zone access, IPS blocks network exploit payloads, and endpoint EDR/antivirus catches local malware delivered via USB or encrypted channels.
[HI] नहीं। Defense-in-Depth में फायरवॉल पोर्ट/ज़ोन नियंत्रित करता है, IPS नेटवर्क एक्सप्लॉइट रोकता है, और एंडपॉइंट EDR स्थानीय फाइलों व USB मालवेयर से बचाता है।
Q3: What happens to encrypted TLS traffic passing through a standalone IPS?
एक सामान्य IPS से गुजरने वाले एन्क्रिप्टेड TLS ट्रैफिक के साथ क्या होता है?
[EN] Unless TLS decryption (SSL inspection) is configured with enterprise certificates, the IPS cannot inspect encrypted application payloads inside HTTPS, which is why modern IPS engines are commonly embedded inside TLS-decrypting NGFWs.
[HI] यदि TLS डिक्रिप्शन सक्रिय न हो, तो IPS एन्क्रिप्टेड HTTPS के अंदर छिपे हमलों को नहीं देख सकता; इसीलिए आज IPS को TLS डिक्रिप्ट करने वाले NGFW में जोड़ा जाता है।
Post a Comment
Post a Comment