Firewalls: Packet Filtering Firewalls (Stateless) Notes in Hindi & English : फायरवॉल: पैकेट फ़िल्टरिंग फायरवॉल (स्टेटलेस) के नियम और 20 महत्वपूर्ण MCQ प्रश्न (Rajasthan IT Exam)

Post a Comment

PGDCA, BCA, B-Tech, MCA, M-Tech, B.Sc computer science राजस्थान सूचना सहायक व कंप्यूटर शिक्षक विशेष नोट्स: इस अध्याय में हम Firewalls: Packet Filtering Firewalls (Stateless) (फायरवॉल: पैकेट फ़िल्टरिंग फायरवॉल (स्टेटलेस) के नियम) की संपूर्ण थ्योरी, मुख्य तकनीकी बिंदु, तुलनात्मक तालिका और विगत परीक्षाओं के पैटर्न पर आधारित 20 अति-महत्वपूर्ण बहुविकल्पीय प्रश्न (MCQs) विस्तृत हिंदी व अंग्रेजी व्याख्या सहित पढ़ेंगे।

Overview: Stateless packet filtering firewalls operate at OSI Layers 3 and 4 by inspecting individual IP and TCP/UDP headers in isolation against an ordered Access Control List (ACL). Because they maintain no memory of prior packets or active connections, they achieve wire-speed forwarding in routers but cannot track dynamic sessions or inspect Layer 7 payloads.

अध्याय सार: स्टेटलेस पैकेट फ़िल्टरिंग फायरवॉल OSI की लेयर 3 और 4 पर काम करते हैं और प्रत्येक पैकेट के IP व TCP/UDP हेडर की जाँच पूर्वनिर्धारित Access Control List (ACL) नियमों के आधार पर अलग-अलग करते हैं। ये पुराने पैकेट्स का कोई रिकॉर्ड नहीं रखते, जिससे इनकी गति बहुत तेज़ होती है लेकिन ये सेशन ट्रैक करने या एप्लिकेशन डेटा पढ़ने में असमर्थ होते हैं।

Firewalls: Packet Filtering Firewalls (Stateless): Detailed Notes & Architecture (फायरवॉल: पैकेट फ़िल्टरिंग फायरवॉल (स्टेटलेस) के नियम)

1. Layer 3/4 Header Inspection & 5-Tuple Matching (लेयर 3/4 हेडर निरीक्षण और 5-टपल मिलान)

[EN] A stateless packet filter examines Layer 3 (Network) and Layer 4 (Transport) header metadata for every packet crossing an interface without reconstructing streams or inspecting payload bytes. Decisions rely on the classic 5-tuple: Source IP address, Destination IP address, Transport Protocol (TCP=6, UDP=17, ICMP=1), Source Port, and Destination Port, alongside IP flags, TTL, or TCP control flags (SYN, ACK, RST, FIN). Because each packet is evaluated independently, no session state RAM table is allocated.

[HI] स्टेटलेस पैकेट फ़िल्टर किसी भी पैकेट के भीतर का डेटा पढ़े बिना केवल नेटवर्क (लेयर 3) और ट्रांसपोर्ट (लेयर 4) हेडर के 5-टपल की जाँच करता है: सोर्स IP, डेस्टिनेशन IP, प्रोटोकॉल नंबर (TCP=6, UDP=17, ICMP=1), सोर्स पोर्ट और डेस्टिनेशन पोर्ट। इसके अलावा यह TCP फ्लैग्स (SYN, ACK, RST) और ICMP टाइप भी देख सकता है। चूंकि हर पैकेट की जाँच स्वतंत्र रूप से होती है, इसलिए मेमोरी में कोई स्टेट टेबल नहीं बनती।

2. Access Control Lists (ACLs), Top-Down Order & Implicit Deny (एक्सेस कंट्रोल लिस्ट (ACL), क्रम और इम्प्लिसिट डिनाई)

[EN] Filtering policies are encoded as ordered Access Control Lists evaluated sequentially top-to-bottom on a strict first-match-wins basis: as soon as a packet matches one rule, evaluation stops and that rule's PERMIT or DENY action executes. Cisco Standard ACLs (1-99, 1300-1999) match only Source IP and belong near the destination, whereas Extended ACLs (100-199, 2000-2699) check the full 5-tuple and belong near the source. Every ACL ends with an invisible Implicit Deny Any rule dropping all unmatched traffic.

[HI] फायरवॉल नियम Access Control List (ACL) में लिखे जाते हैं और ऊपर से नीचे क्रमवार (Top-Down First-Match) जाँचे जाते हैं; पहला मैच मिलते ही PERMIT या DENY कार्रवाई लागू हो जाती है। सिस्को स्टैंडर्ड ACL (1-99) केवल सोर्स IP देखता है (डेस्टिनेशन के पास लगता है), जबकि एक्सटेंडेड ACL (100-199) पूरा 5-टपल देखता है (सोर्स के पास लगता है)। प्रत्येक ACL के अंत में एक छिपा हुआ 'Implicit Deny Any' नियम होता है जो बाकी सभी पैकेट गिरा देता है।

3. Return Traffic Dilemma & TCP Established Workaround (रिटर्न ट्रैफिक की समस्या और TCP Established उपाय)

[EN] Because a stateless filter forgets an outbound request the moment it leaves, an explicit inbound permit rule is required for return packets arriving on unpredictable client ephemeral ports (1024-65535). Simply permitting all inbound traffic to ports 1024-65535 exposes internal services running on high ports. As a crude workaround, admins filter inbound TCP replies using the 'established' keyword—permitting packets with the TCP ACK or RST flag set—yet attackers easily bypass this by sending forged unsolicited ACK packets during port scans.

[HI] स्टेटलेस फायरवॉल आउटबाउंड रिक्वेस्ट को याद नहीं रखता, इसलिए वापस आने वाले पैकेट्स को अंदर आने देने के लिए 1024-65535 जैसे इफेमरल पोर्ट्स के लिए अलग इनबाउंड नियम बनाना पड़ता है। इससे बचने के लिए प्रशासक 'established' नियम लगाते हैं जो केवल ACK या RST फ्लैग वाले पैकेट आने देता है, लेकिन हमलावर नकली ACK पैकेट भेजकर आसानी से इस नियम को चकमा दे सकते हैं।

4. Performance Strengths & Security Blind Spots (उच्च गति के लाभ और सुरक्षा कमियाँ)

[EN] Implemented directly in router TCAM (Ternary Content-Addressable Memory) and hardware ASICs, stateless filtering handles multi-gigabit backbone throughput with near-zero latency and immunity to state-table memory exhaustion. However, stateless firewalls suffer major blind spots: they cannot verify IP source spoofing without Reverse Path Forwarding (uRPF), cannot handle multi-channel protocols like active FTP dynamically, can be evaded via fragmented IP packets (tiny-fragment attacks), and are completely blind to Layer 7 malware, SQL injection, or tunneling over port 443.

[HI] राउटर के हार्डवेयर ASIC और TCAM मेमोरी में चलने के कारण स्टेटलेस फ़िल्टर बहुत कम विलंबता के साथ गीगाबिट गति प्रदान करते हैं और सेशन मेमोरी भरने के हमले से सुरक्षित रहते हैं। हालांकि, इनमें कई सुरक्षा कमियाँ हैं: ये IP स्पूफिंग नहीं पकड़ पाते, FTP जैसे मल्टी-चैनल प्रोटोकॉल को डायनामिक रूप से संभाल नहीं सकते, छोटे IP फ्रैगमेंट हमलों से चकमा खा सकते हैं और एप्लिकेशन लेयर (SQL इंजेक्शन या मालवेयर) को बिल्कुल नहीं देख सकते।

Syntax, Formula & Technical Example (Firewalls: Packet Filtering Firewalls (Stateless))

! Cisco IOS Extended ACL (Stateless Layer 3/4 Filter placed near Source)
access-list 110 permit tcp 192.168.10.0 0.0.0.255 any eq 443
access-list 110 permit tcp any eq 443 192.168.10.0 0.0.0.255 established
access-list 110 deny   ip  192.168.10.0 0.0.0.255 10.0.0.0 0.255.255.255
! Invisible Implicit Deny Any at bottom drops all remaining packets
interface GigabitEthernet0/1
 ip access-group 110 in

Firewalls: Packet Filtering Firewalls (Stateless) Quick Reference & Comparison Table

Stateless ACL ElementHeader Matching & Placement RuleKey Security & Exam Note
Standard IP ACL (1-99)Matches Source IPv4 address only; place near destinationBroad granularity; risks blocking valid other destinations
Extended IP ACL (100-199)Matches 5-tuple plus TCP flags; place near sourceDrops unwanted packets early before traversing WAN links
Implicit Deny AnyUnwritten final catch-all rule at end of every ACLEnforces default-deny posture unless permit rules match
TCP Established KeywordChecks solely if TCP ACK or RST control bit equals 1Bypassable via crafted ACK probes without a real session

Firewalls: Packet Filtering Firewalls (Stateless) Top 20 Bilingual MCQs with Answers

Q1. At which layers of the OSI model do stateless packet filtering firewalls primarily operate?

(स्टेटलेस पैकेट फ़िल्टरिंग फायरवॉल मुख्यतः OSI मॉडल की किन लेयर्स पर कार्य करते हैं?)

(A) Layer 3 (Network) and Layer 4 (Transport)

(B) Layer 5 (Session) and Layer 6 (Presentation)

(C) Layer 7 (Application) exclusively

(D) Layer 1 (Physical) and Layer 2 (Data Link) only

Correct Answer: (A)

[EN] Stateless filters read IP addresses/protocols at Layer 3 and TCP/UDP port numbers/flags at Layer 4 without inspecting payload data.

[HI] स्टेटलेस फ़िल्टर लेयर 3 (IP हेडर) और लेयर 4 (TCP/UDP पोर्ट व फ्लैग्स) के आधार पर पैकेट रोकते या भेजते हैं।

Q2. Which five fields form the standard '5-tuple' inspected by an extended stateless packet filter?

(एक एक्सटेंडेड स्टेटलेस पैकेट फ़िल्टर द्वारा जांचे जाने वाले मानक '5-टपल' में कौन से पाँच फ़ील्ड शामिल होते हैं?)

(A) Username, Password, Cookie, Session ID, and IP

(B) DNS Name, TLS Cipher, HTTP Method, TTL, and CRC

(C) MAC Address, VLAN ID, TTL, Payload Hash, and URL

(D) Source IP, Destination IP, Source Port, Destination Port, and Protocol

Correct Answer: (D)

[EN] A packet's network conversation identity at Layers 3 and 4 is uniquely described by its source/destination IPs, source/destination ports, and IP protocol number.

[HI] लेयर 3 और 4 पर पैकेट की पहचान सोर्स IP, डेस्टिनेशन IP, सोर्स पोर्ट, डेस्टिनेशन पोर्ट और प्रोटोकॉल नंबर के 5-टपल से होती है।

Q3. In what order does a stateless firewall evaluate rules inside an Access Control List (ACL)?

(स्टेटलेस फायरवॉल Access Control List (ACL) में नियमों का मूल्यांकन किस क्रम में करता है?)

(A) Randomly using hash buckets across all rules

(B) Alphabetically by rule name, combining all permits

(C) Sequentially from top to bottom, stopping at the very first matching rule

(D) From bottom to top prioritizing deny statements

Correct Answer: (C)

[EN] Top-down first-match evaluation means a broad permit placed above a specific deny will allow the traffic before the deny is ever reached.

[HI] ACL नियम हमेशा ऊपर से नीचे क्रम में पढ़े जाते हैं और पहला मैच मिलते ही आगे के नियमों की जाँच रुक जाती है।

Q4. What happens to a packet that matches NONE of the explicit rules configured in an ACL?

(यदि कोई पैकेट ACL में लिखे गए किसी भी नियम से मेल नहीं खाता है, तो उसका क्या होता है?)

(A) It is sent to an external DNS server for inspection

(B) It is queued indefinitely until an admin approves it

(C) It is forwarded by default unless explicitly blocked

(D) It is dropped by the invisible 'Implicit Deny Any' rule at the end of the ACL

Correct Answer: (D)

[EN] Every Cisco and standard firewall ACL contains an unwritten final deny-all rule implementing a fail-safe default-deny posture.

[HI] प्रत्येक ACL के अंत में छिपा हुआ 'Implicit Deny Any' नियम होता है जो बिना मैच वाले सभी पैकेट्स को गिरा देता है।

Q5. Where should a Cisco Standard IP ACL (numbers 1-99) be placed on a router interface, and why?

(राउटर पर सिस्को स्टैंडर्ड IP ACL (संख्या 1-99) कहाँ लगाया जाना चाहिए और क्यों?)

(A) As close to the destination as possible, because it filters solely by Source IP

(B) As close to the source as possible, to save bandwidth

(C) Only on loopback interfaces

(D) On external ISP BGP peers exclusively

Correct Answer: (A)

[EN] Since a Standard ACL cannot specify destination IP or ports, placing it near the source would accidentally block that source from reaching legitimate unrelated networks.

[HI] स्टैंडर्ड ACL केवल सोर्स IP देखता है; इसे सोर्स के पास लगाने से अन्य वैध नेटवर्क का ट्रैफिक भी बंद हो जाएगा, इसलिए इसे डेस्टिनेशन के पास लगाते हैं।

Q6. Where is it best practice to place an Extended IP ACL (numbers 100-199) in a corporate network?

(कॉर्पोरेट नेटवर्क में एक्सटेंडेड IP ACL (संख्या 100-199) लगाना कहाँ सबसे उपयुक्त माना जाता है?)

(A) Only inside Layer 2 switches

(B) Never on ingress interfaces

(C) Directly at the final destination host NIC

(D) As close to the source of the traffic as possible

Correct Answer: (D)

[EN] Because Extended ACLs specify exact source, destination, protocol, and ports, placing them near the source drops unauthorized packets immediately without wasting core bandwidth.

[HI] एक्सटेंडेड ACL सोर्स, डेस्टिनेशन और पोर्ट सभी जाँचता है, इसलिए अवांछित पैकेट को शुरुआत में ही रोकने हेतु इसे सोर्स के पास लगाते हैं।

Q7. Why is the stateless `established` rule (checking TCP ACK/RST bits) considered insecure against clever scanners?

(स्टेटलेस फायरवॉल का `established` नियम (TCP ACK/RST बिट जाँच) चतुर स्कैनर्स के सामने असुरक्षित क्यों है?)

(A) Setting the ACK bit deletes the ACL automatically

(B) UDP headers contain three ACK bits

(C) The ACK bit is always encrypted inside TLS

(D) Attackers can forge unsolicited packets with the ACK bit set to slip past without an actual open session

Correct Answer: (D)

[EN] Because the stateless filter keeps no memory of whether a real 3-way handshake occurred, a crafted TCP ACK scan passes right through to probe internal ports.

[HI] स्टेटलेस फ़िल्टर को पुराने हैंडशेक की याद नहीं होती, इसलिए हमलावर सीधे नकली ACK फ्लैग वाला पैकेट भेजकर फ़िल्टर को पार कर सकता है।

Q8. Which attack sends extremely small fragmented IP packets so the Layer 4 TCP/UDP port header sits inside the second fragment?

(कौन सा हमला बहुत छोटे IP फ्रैगमेंट पैकेट भेजता है ताकि TCP/UDP पोर्ट हेडर दूसरे फ्रैगमेंट में चला जाए और पहले पैकेट में छिप जाए?)

(A) DNS Amplification

(B) Pass-the-Hash

(C) Tiny-Fragment / IP Fragmentation Evasion Attack

(D) ARP Cache Poisoning

Correct Answer: (C)

[EN] A stateless filter checking ports only on the initial fragment (offset 0) cannot find the destination port if it is pushed into fragment 2.

[HI] जब TCP/UDP पोर्ट नंबर पहले फ्रैगमेंट के बजाय दूसरे टुकड़े में चले जाते हैं, तो सरल स्टेटलेस फ़िल्टर पोर्ट की जाँच नहीं कर पाता।

Q9. What major operational advantage do stateless packet filters retain over deep-inspection firewalls on high-speed backbone routers?

(हाई-स्पीड बैकबोन राउटर पर डीप-इंस्पेक्शन फायरवॉल की तुलना में स्टेटलेस पैकेट फ़िल्टर का सबसे बड़ा लाभ क्या है?)

(A) Zero false positives against zero-day malware

(B) Ultra-low latency wire-speed forwarding in ASIC/TCAM hardware with no state memory limits

(C) Automatic decryption of TLS 1.3 payloads

(D) Ability to block SQL injection strings inside HTTPS

Correct Answer: (B)

[EN] Stateless ACLs run in deterministic hardware TCAM lookups in nanoseconds and cannot suffer TCP SYN-flood state-table exhaustion.

[HI] हार्डवेयर ASIC/TCAM में चलने से ये नैनोसेकंड में काम करते हैं और स्टेट टेबल भरने वाले हमलों से प्रभावित नहीं होते।

Q10. Why do stateless packet filters struggle with Active FTP (TCP port 21 control + dynamic port 20/ephemeral data)?

(स्टेटलेस पैकेट फ़िल्टर Active FTP (पोर्ट 21 कंट्रोल और डायनामिक डेटा पोर्ट) को संभालने में क्यों कठिनाई महसूस करते हैं?)

(A) Stateless filters refuse all TCP packets above port 20

(B) Port 21 is reserved exclusively for SSH

(C) FTP uses ICMP instead of TCP

(D) They cannot parse FTP PORT commands dynamically to open temporary return data ports

Correct Answer: (D)

[EN] Active FTP negotiates data ports inside the Layer 7 control stream; without state/ALG tracking, admins must leave huge port ranges (1024-65535) permanently open.

[HI] स्टेटलेस फ़िल्टर FTP के अंदरूनी पोर्ट संवाद को नहीं समझता, जिससे डेटा कनेक्शन के लिए पूरा हाई-पोर्ट रेंज खुला छोड़ना पड़ता है।

Q11. In Cisco ACL syntax, what does the wildcard mask `0.0.0.255` represent for network `192.168.10.0`?

(सिस्को ACL सिंटैक्स में `192.168.10.0` के साथ वाइल्डकार्ड मास्क `0.0.0.255` क्या दर्शाता है?)

(A) Match the first three octets exactly and allow any value (0-255) in the fourth octet (/24 subnet)

(B) Match the fourth octet strictly and ignore the first three

(C) Deny the entire Class A network

(D) Block only host 192.168.10.255

Correct Answer: (A)

[EN] In ACL wildcard masks, bit 0 means 'must match' and bit 1 means 'ignore/don't care', making 0.0.0.255 the inverse of subnet mask 255.255.255.0.

[HI] वाइल्डकार्ड मास्क में 0 का अर्थ 'समान होना अनिवार्य' और 1 का अर्थ 'कोई भी मान मान्य' होता है, जो /24 सबनेट को दर्शाता है।

Q12. Which attack easily bypasses a naive stateless ingress filter that only trusts `Source IP == Internal Subnet`?

(यदि कोई स्टेटलेस फ़िल्टर केवल सोर्स IP देखकर आंतरिक नेटवर्क पर भरोसा करता है, तो कौन सा हमला उसे आसानी से चकमा दे सकता है?)

(A) Cross-Site Scripting (XSS)

(B) Dictionary Password Guessing

(C) IP Address Spoofing

(D) Clickjacking

Correct Answer: (C)

[EN] Without stateful TCP sequence validation or uRPF checks, an external attacker can forge a packet header claiming an internal source IP address.

[HI] बिना सेशन स्टेट या uRPF जाँच के बाहरी हमलावर पैकेट हेडर में नकली आंतरिक सोर्स IP लिखकर आसानी से अंदर प्रवेश कर सकता है।

Q13. What is the IP protocol number matched when writing a stateless firewall rule for ICMP ping packets?

(ICMP पिंग पैकेट्स के लिए स्टेटलेस फायरवॉल नियम लिखते समय कौन सा IP प्रोटोकॉल नंबर मैच किया जाता है?)

(A) Protocol 17

(B) Protocol 50

(C) Protocol 6

(D) Protocol 1

Correct Answer: (D)

[EN] In IPv4 headers, Protocol 1 denotes ICMP, 6 denotes TCP, 17 denotes UDP, and 50 denotes IPsec ESP.

[HI] IPv4 हेडर में प्रोटोकॉल 1 का अर्थ ICMP, 6 का अर्थ TCP और 17 का अर्थ UDP होता है।

Q14. In a stateless ACL, if rule 1 is `permit ip any any` and rule 2 is `deny tcp any any eq 23`, what happens to Telnet (port 23) traffic?

(स्टेटलेस ACL में यदि नियम 1 `permit ip any any` और नियम 2 `deny tcp any any eq 23` हो, तो Telnet (पोर्ट 23) ट्रैफिक का क्या होगा?)

(A) Telnet traffic is blocked because deny overrides permit

(B) Telnet traffic is permitted because rule 1 matches first and stops further evaluation

(C) The firewall crashes with a syntax loop

(D) Only UDP port 23 is blocked

Correct Answer: (B)

[EN] Rule ordering is strictly top-down first-match; specific deny rules MUST always appear above broader permit rules.

[HI] नियम ऊपर से नीचे जांचे जाते हैं, इसलिए नियम 1 पहले मैच होकर Telnet को अनुमति दे देगा और नियम 2 तक पहुँचेगा ही नहीं।

Q15. Which attack vector CANNOT be detected or stopped by a pure Layer 3/4 stateless packet filtering firewall?

(केवल लेयर 3/4 स्टेटलेस पैकेट फ़िल्टरिंग फायरवॉल द्वारा किस हमले को न तो पहचाना जा सकता है और न ही रोका जा सकता है?)

(A) SQL Injection (`' OR 1=1--`) sent inside a valid HTTP request on permitted TCP port 80

(B) Dropping inbound UDP port 161 SNMP traffic from the Internet

(C) Permitting outbound TCP port 443 to a single vendor IP

(D) Blocking an unauthorized external IP range from reaching internal SSH port 22

Correct Answer: (A)

[EN] Port 80 is allowed by the Layer 4 rule, and the stateless firewall never inspects the HTTP URI or POST body payload.

[HI] पोर्ट 80 पर वैध रूप से आने वाली HTTP रिक्वेस्ट के अंदर छिपे SQL इंजेक्शन पेलोड को स्टेटलेस फ़िल्टर बिल्कुल नहीं पढ़ सकता।

Q16. Which of the following statements about stateless packet filtering firewalls is FALSE?

(स्टेटलेस पैकेट फ़िल्टरिंग फायरवॉल के बारे में निम्नलिखित में से कौन सा कथन असत्य (FALSE) है?)

(A) Stateless firewalls inspect Layer 3 IP headers and Layer 4 ports/flags

(B) Stateless packet filtering delivers high throughput with low memory usage

(C) Stateless firewalls dynamically track TCP three-way handshake state transitions in a session table

(D) Every ACL concludes with an implicit deny rule

Correct Answer: (C)

[EN] Tracking TCP three-way handshake states in a session table is the defining property of a STATEFUL firewall, not a stateless filter.

[HI] सेशन टेबल में TCP थ्री-वे हैंडशेक स्टेट को ट्रैक करना स्टेटफुल फायरवॉल का गुण है, स्टेटलेस का नहीं।

Q17. Within Firewalls: Packet Filtering Firewalls (Stateless), which stateless acl element directly maps to: "Matches Source IPv4 address only; place near destination"?

(Firewalls: Packet Filtering Firewalls (Stateless) में कौन सा Stateless ACL Element सीधे "Matches Source IPv4 address only; place near destination" से संबंधित है?)

(A) Extended IP ACL (100-199)

(B) TCP Established Keyword

(C) Implicit Deny Any

(D) Standard IP ACL (1-99)

Correct Answer: (D)

[EN] In Firewalls: Packet Filtering Firewalls (Stateless), 'Standard IP ACL (1-99)' handles 'Matches Source IPv4 address only; place near destination' (Broad granularity; risks blocking valid other destinations).

[HI] Firewalls: Packet Filtering Firewalls (Stateless) में 'Standard IP ACL (1-99)' का कार्य/विवरण 'Matches Source IPv4 address only; place near destination' (Broad granularity; risks blocking valid other destinations) है।

Q18. Which option accurately describes 'Extended IP ACL (100-199)' in Firewalls: Packet Filtering Firewalls (Stateless)?

(Firewalls: Packet Filtering Firewalls (Stateless) के संदर्भ में 'Extended IP ACL (100-199)' की सही विशेषता कौन सी है?)

(A) Checks solely if TCP ACK or RST control bit equals 1

(B) Matches 5-tuple plus TCP flags; place near source

(C) Unwritten final catch-all rule at end of every ACL

(D) Matches Source IPv4 address only; place near destination

Correct Answer: (B)

[EN] 'Extended IP ACL (100-199)' provides 'Matches 5-tuple plus TCP flags; place near source' — key point: Drops unwanted packets early before traversing WAN links.

[HI] 'Extended IP ACL (100-199)' का मुख्य विवरण 'Matches 5-tuple plus TCP flags; place near source' है (Drops unwanted packets early before traversing WAN links)।

Q19. In Firewalls: Packet Filtering Firewalls (Stateless), identify the correct parameter for the specification: "Unwritten final catch-all rule at end of every ACL".

(Firewalls: Packet Filtering Firewalls (Stateless) में "Unwritten final catch-all rule at end of every ACL" विवरण किस विकल्प के लिए सही है?)

(A) Implicit Deny Any

(B) TCP Established Keyword

(C) Standard IP ACL (1-99)

(D) Extended IP ACL (100-199)

Correct Answer: (A)

[EN] 'Implicit Deny Any' corresponds to 'Unwritten final catch-all rule at end of every ACL' (Enforces default-deny posture unless permit rules match).

[HI] 'Implicit Deny Any' का संबंध 'Unwritten final catch-all rule at end of every ACL' (Enforces default-deny posture unless permit rules match) से है।

Q20. Considering Firewalls: Packet Filtering Firewalls (Stateless), what key behavior defines 'TCP Established Keyword'?

(Firewalls: Packet Filtering Firewalls (Stateless) में 'TCP Established Keyword' की मुख्य भूमिका या मान क्या है?)

(A) Matches 5-tuple plus TCP flags; place near source

(B) Matches Source IPv4 address only; place near destination

(C) Checks solely if TCP ACK or RST control bit equals 1

(D) Unwritten final catch-all rule at end of every ACL

Correct Answer: (C)

[EN] 'TCP Established Keyword' represents 'Checks solely if TCP ACK or RST control bit equals 1' (Bypassable via crafted ACK probes without a real session).

[HI] 'TCP Established Keyword' का अर्थ/मान 'Checks solely if TCP ACK or RST control bit equals 1' है (Bypassable via crafted ACK probes without a real session)।

Firewalls: Packet Filtering Firewalls (Stateless) — Exam FAQs

Q1: Are stateless packet filters still used today if we have NGFWs?

जब आधुनिक NGFW मौजूद हैं, तो क्या आज भी स्टेटलेस पैकेट फ़िल्टर का उपयोग होता है?

[EN] Yes. Stateless ACLs remain essential on high-speed core routers, switches, and cloud constructs like AWS Network ACLs (NACLs) for fast wire-speed DDoS pre-filtering before traffic reaches stateful firewalls.

[HI] हाँ। कोर राउटर, स्विच और क्लाउड (जैसे AWS NACL) में भारी ट्रैफिक व DDoS हमलों को तेज़ी से शुरुआती स्तर पर छांटने के लिए आज भी स्टेटलेस ACL का उपयोग होता है।

Q2: Why do rule positions matter so much in a stateless ACL?

स्टेटलेस ACL में नियमों का क्रम इतना महत्वपूर्ण क्यों होता है?

[EN] Because the firewall stops checking as soon as a single rule matches. Placing a broad permit rule above a specific deny rule renders the deny rule completely ineffective.

[HI] क्योंकि पहला नियम मैच होते ही जाँच रुक जाती है। इसलिए हमेशा विशिष्ट (Specific) नियम ऊपर और सामान्य (Broad) नियम नीचे लिखे जाते हैं।

Q3: Can a stateless firewall block websites by domain name or URL?

क्या स्टेटलेस फायरवॉल किसी वेबसाइट को उसके URL या डोमेन नाम से ब्लॉक कर सकता है?

[EN] No. Domain paths and HTTP URLs live inside Layer 7 payloads; stateless filters only see numeric IP addresses and Layer 4 port numbers.

[HI] नहीं। URL और डोमेन पथ एप्लिकेशन लेयर (लेयर 7) का हिस्सा हैं, जबकि स्टेटलेस फायरवॉल केवल IP एड्रेस और पोर्ट नंबर ही देख सकता है।

Related Posts

  • Loading related posts...

Post a Comment

Search Topic Notes & 20 MCQs (Hindi / English)